Description CEC220 FINAL PROJECT (Digital circuits) Engine Controller Design In this project, ...

---

Description CEC220 FINAL PROJECT (Digital circuits) Engine Controller Design In this project, you will have to design a complete four-stroke four-cylinder engine controller in VHDL. This controller will work under the assumption of having an electronically driven valvetrain and input from a crank position sensor. A typical four-stroke engine has four “states”, called strokes : intake, compression, power, and exhaust. These four strokes occur over two revolutions of the crankshaft, with each stroke taking half a revolution. The operation of a single cylinder is illustrated in the figure below (components marked in red are engaged):